phone Phone
+622189455015
close
menu

CV. AnezaTeknik Safety

sql
Sarung Tangan Listrik 25kv
Sarung Tangan Listrik 25kv
Hover to Zoom

Jual Sarung Tangan Listrik 25kv



Spesifikasi Sarung Tangan Listrik 25kv

Sarung Tangan Safety

 

Descriptions :

- Insulated gloves also known as high-voltage insulated gloves , is made of natural rubber, insulating rubber or latex by tabletting, molded, vulcanized or molded fingers dipped gloves, mainly for electrical work. (1) After the user purchased gloves, were found in the transport, storage during rain, moisture mildew, or other abnormal changes to the statutory testing agencies should be reviewed electrical performance test.

- It must be inflated before using the test and found that any damage can not be used.

- It should be set into the inner cylinder sleeves mouth to prevent accidents.

- Use, dirt should be cleaned inside and outside, to be dry, sprinkle talcum powder placed flat, to prevent pressure damage to them and do not put in the ground.

- Should be stored in dry and ventilated room temperature -15 to + 30 relative humidity 50-80% of the warehouse, away from heat, leaving the ground and walls 20 cm or more. Avoid being affected by acid, alkali, oil, corrosive substances affect not open place away from direct sunlight, do not put in the ground.

Specifications :

Dimension: Approximately 40cm(L)

 

Descriptions :

- Insulated gloves also known as high-voltage insulated gloves , is made of natural rubber, insulating rubber or latex by tabletting, molded, vulcanized or molded fingers dipped gloves, mainly for electrical work. (1) After the user purchased gloves, were found in the transport, storage during rain, moisture mildew, or other abnormal changes to the statutory testing agencies should be reviewed electrical performance test.

- It must be inflated before using the test and found that any damage can not be used.

- It should be set into the inner cylinder sleeves mouth to prevent accidents.

- Use, dirt should be cleaned inside and outside, to be dry, sprinkle talcum powder placed flat, to prevent pressure damage to them and do not put in the ground.

- Should be stored in dry and ventilated room temperature -15 to + 30 relative humidity 50-80% of the warehouse, away from heat, leaving the ground and walls 20 cm or more. Avoid being affected by acid, alkali, oil, corrosive substances affect not open place away from direct sunlight, do not put in the ground.

Specifications :

Dimension: Approximately 40cm(L)

 

Untuk keterangan lebih lanjut, silahkan download PDF ini :